A measurement produced by a dedicated testing practice, documented so it can be handed to a board, a managing agent or counsel.
Send the details and a specialist will respond.
Point-of-use testing measures water after it has traveled through the property's service line and plumbing.
Service lines, interior pipes, solder, valves and fixtures can all influence water after it enters a property.
Laboratory analysis can be selected for lead, bacteria, metals, PFAS and other parameters based on what you want to know.
Building age, plumbing history, what changed and when, how many fixtures are involved and what the resident actually observed. The scope is designed here rather than sold from a menu.
The fixtures at the center of the complaint are sampled, plus reference points elsewhere in the property where that helps distinguish a unit problem from a building problem.
Stagnation is requested and logged rather than assumed, and existing treatment equipment is noted.
Samples travel sealed and logged under documented chain of custody, with holding times observed for each analysis.
Sampling points, conditions, methods, reporting limits and values, with results reported in full. The findings stand on their own.
Water quality concerns raised inside multifamily buildings frequently stall, not because either party is acting unreasonably, but because there is no measurement both sides can read. An independent analysis, properly documented, resolves that.
Olympian Water Testing provides independent tap water testing for residents, cooperative and condominium boards, building owners and managing agents throughout New York, New Jersey and Connecticut.
A result becomes useful to more than one party when the conditions surrounding it are documented. Which fixture was sampled, how long the water had been standing, whether treatment equipment was present and what had recently changed in the building all bear on the figure.
Olympian Water Testing records each of those elements as standard practice, which allows the same document to be reviewed by a resident, a board, a managing agent, an engineer or counsel without the discussion turning to methodology.
Sampling is available to residents and to buildings alike, and in some cases both parties on the same property engage independently.
The engagement begins with the observation itself. Which taps are affected, whether hot or cold, when it began, whether it clears, and what happened in the property or the street beforehand. That history frequently narrows the question substantially before any bottle is opened.
Sampling points are then chosen to test the specific proposition rather than to survey the property broadly, with reference points elsewhere in the building included where they help separate a unit condition from a building one.
Stagnation periods are requested of the client and documented, and samples are handled under documented chain of custody with holding times observed.
Our reporting states each sampling point, the analytical method, the reporting limit and the measured value, together with the applicable reference framework.
A substantial proportion of these engagements conclude with results showing nothing of concern, which is a genuinely useful outcome for a resident and for a building, and it is documented with the same care as any other finding.
Where results are to be shared with a third party, the documentation supports that directly.
Olympian Water Testing has provided independent water testing since 1991, working from five departure locations across New York City into New York, New Jersey and Connecticut.
NELAP accredited laboratory analysis applies throughout, with accredited results provided.
Enquiries are received at any hour of any day, and one of our consultants determines parameter selection before the sampling event is arranged.
Tell Olympian what you want to understand about the property or water source, and the testing can be tailored to your specific questions and concerns.
